Slide the HP 70340A module into the mainframe.
Tighten the module latch using an 8 mm hex-ball driver.
Close the mainframe front panel door.
Note
To Power-On the HP 70340A
Check to make sure that the power cable is undamaged.
Set the mainframe LINE (Mains) switch to o.
Connect the power cable(s) to the system and then to the power source.
Set the mainframe LINE (Mains) switch to ON.
Check that the HP 70340A module HP-IB address is correct.
4
5
DISPLAY
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
where XX is the current HP-IB address and YY is the HP-MSIB column address
4
5
MENU
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ERR
4
5
DSP
ERR
Installing and Verifying the
Signal Generator
1-5