Table of Contents
Advertisement
RF Output connector
Disconnect the power meter and power sensor from the external signal path.
Notes
Programming Example
3-38
Generating Signals
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
displayed power level is the level at the external port, not at the
NNNNNNNNNNNNNNNNN
for any power level
Dimensions frequency array.
Dimensions correction factor array.
Sets signal generator address variable to 719.
Sets power meter address variable to 719.
Enters start frequency into variable Start freq.
Enters stop frequency into variable Stop freq.
Enters number of points into variable Points.
Enters correction table number into variable Ta-
ble num.
Enters power level into variable Power lev.
Presets the signal generator.
Sets signal generator power level to the entered
value.
Presets the power meter.
Sets number of averages.
Sets power meter to trigger hold mode.
Calculates the frequency step.
Sets rst frequency in array to start frequency.
Stores current frequency in array.
Sets signal generator frequency to the current
frequency in array.
Sets power meter frequency to the current fre-
quency in array.
Sets power meter to trigger with delay.
Waits ve seconds for power meter to settle.
Advertisement
Table of Contents
