Juniper ACX500 Quick Start Manual page 26

Before installing the router, read the guidelines for site preparation in the ACX500 Universal Metro Router
Hardware Guide to make sure that the site meets power, environmental, and clearance requirements for
the router.
To prevent injury, keep your back straight and lift with your legs, not your back.
When removing or installing an electrical component, always place it component-side up on a flat
antistatic surface or in an electrostatic bag.
When you install the router, always make the ground connection first and disconnect it last.
Do not work on the system or connect or disconnect cables during electrical storms.
Before working on equipment that is connected to power lines, remove jewelry, including rings, necklaces,
and watches. Metal objects heat up when connected to power and ground and can cause serious burns
or become welded to the terminals.
Failure to observe these safety warnings can result in serious physical injury.
Power cable warning (Japan):
WARNING:
Translation from Japanese—The attached power cable is only for this product. Do not
use the cable for another product.
Some parts of the router might become hot. The following label on the router provides warning for the
hot surface:
If you are installing the GPS antenna, ensure that the antenna is located at a location away from overhead
power lines.
26