Remote Management - TP-Link EC330-G5u User Manual

Chapter 12
Note:
If you want all local devices can manage the router, just leave the

12. 7. 3. Remote Management

By default, the remote devices are not allowed to manage the router from the internet.
You can enable remote management over HTTP and/or HTTPS if needed. HTTPS is a
more secure way to access the router.
Note:
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use the remote management
feature because private addresses are not routed on the internet.
Follow the steps below to allow remote devices to manage the router over HTTPS.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
Management section.
3. Enable Remote Management
connection. Keep the
4. Set the client device allowed for remote management. Select
devices to manage the router. If you just want to allow a specific device to manage
the router, select
of the remote device.
5. Click Save.
All devices or the specific device on the internet can log in to your router using the
address displayed on the
router.
> System Tools > Administration
and Remote Management via HTTPS
Port as the default setting.
Only the Following IP/MAC Address
Manage This Router via the Address
IP/MAC Address field blank.
page, and locate the
All
and enter the IP/MAC address
field to manage the
Manage Your Router
Remote
to allow HTTPS
to allow all remote
95