Use Quick Setup Wizard; Manually Set Up Your Internet Connection - TP-Link EC330-G5u User Manual

Chapter 4
4. 1.

Use Quick Setup Wizard

The Quick Setup Wizard will guide you through the process to set up your router.
Tips:
If you need the IPv6 internet connection, please refer to the section of
Follow the steps below to set up your router.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Click Quick Setup
to connect your router to the internet.
Note:
If you have changed the preset wireless network name (SSID) and wireless password during the Quick Setup process, all
your wireless devices must use the new SSID and password to connect to the router.
4. 2.

Manually Set Up Your Internet Connection

In this part, you can check your current internet connection settings. You can also
modify the settings according to the service information provided by your ISP.
Follow the steps below to check or modify your internet connection settings.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Basic > Internet.
3. Select your internet connection type from the drop-down list.
Note:
If you are unsure of what your connection type is, you can consult your ISP. Since different connection types require
different cables and connection information, you can also refer to the demonstrations in Step 4 to determine your
connection type.
4. Follow the instructions on the page to continue the configuration. Parameters on the
figures are just used for demonstration.
1 ) If you choose
effective. Dynamic IP users are usually equipped with a cable TV or fiber cable.
on the top of the page. Then follow the step-by-step instructions
Dynamic IP, you just need to click
Set Up Internet Connection
Set Up an IPv6 Internet Connection.
Save the make the settings
14