Tennant IRIS T300 Installation Instructions Manual

KIT NO. 9014185
This kit includes the necessary parts to replace a defective control board with IRIS telemetry technology.

INSTALLATION INSTRUCTIONS:

Installation Time: 1 Hour
Kit Installation Requirements:
- Tennant ServiceLink computer or a computer with Wi-Fi
connection to access the Tennant Service Application
Software, and USB cable (supplied with kit).
Computer System Requirements: Windows
Microsoft .NET Framework 4.5 or later, USB Port.
- The IRIS technology MUST be reactivated after
replacing control board as described on page 6.
Special Tools Required: T-25 torque screwdriver

PREPARE MACHINE FOR KIT INSTALL:

1. Drain the solution and recovery tanks.
2. Park the machine on a level surface and remove key.
3. Disconnect battery cables from battery pack. If model
is equipped with the red quick disconnect connector,
disconnect connector (Figure 1).
NOTE: If model is equipped with the optional battery
lift-out tray, the batteries and tray must be removed from
machine to allow space to replace the control board.
WARNING: Always disconnect battery cables
from machine before working on electrical
components.
4. Cut the three cable-ties that secure the vacuum hose,
drain hose, and battery cables to the heat- sink panel
(Figure 2).
Cable-Ties
9014181 Rev. 01 (01- 2017)
T300 IRIS Control Board
Replacement Kit
 7 OS,
Models with battery
cable connectors
Fig. 1
Cable-Tie
Fig. 2
9014185 Kit Contents
1
3
Ref Part No. Description
1 1215340 Circuitboard, Assy [Vw, Cntrl, Telem]
2 27964 Strap, Ground, Static
3 130773 Cable-tie
4 1071235 USB Cable,
5 1227812 Bracket, SMA Connector [Antenna]
6 1227815 Spacer, unthreaded, Alum. [Bracket]
5. Remove the top two screws from the heat-sink panel
and carefully lower panel as shown (Figure 3). Place a
piece of cardboard over the battery terminals to prevent
contact with metal heat-sink panel.
FOR SAFETY: When servicing machine, keep all
metal objects off batteries.
6. Remove the existing SIM card from the old control
board and save for new board (Figure 4).
SIM
Card
Tennant Company
Page 1 of 6
6
2
5
4
Fig. 3
Fig. 4
www.tennantco.com
Qty.
1
1
3
1
1
2