Husqvarna 520iRX Operator's Manual page 17

cutting attachment that
you use, see
overview on page 2 . If an
incorrect or faulty cutting
attachment guard is
attached this can cause
serious personal injury.
The cutting attachment guard stops objects that ejects in
the direction of the operator. It also prevents injuries that
occur if you touch the cutting attachment.
1. Stop the motor.
2. Do a visual check for damages, for example cracks.
3. Replace the cutting attachment guard if it is
damaged.
To do a check of the locknut
WARNING: Stop the
motor, use protective
gloves and be careful
around the sharp edges
of the cutting attachment.
• Make sure that the locknut is attached and tightened
To attach and remove the locknut on
correctly. See
page 21 .
Quick release function of the harness
WARNING: Do not use
the harness if the quick
release function is
defective. Make sure that
the quick release
function operates
757 - 001 - 24.10.2018
Product
correctly when you adjust
the product.
WARNING: If the
product is not safely
attached to the harness,
you can not control the
product and that can
result in injury to you or
others.
The quick release function is at
the front of the harness. The
harness straps must always
stay at the correct position.
In an emergency, the quick
release function helps you to
remove the product safely.
Battery safety
WARNING: Read the
warning instructions that
follow before you use the
product.
Only use the BLi battery.
•
Accessories on page
Refer to
32 . The battery is software
encrypted.
17