Sony RM-PP1 Installation Manual page 8

1-5. Rack Mounting
Rack Mounting Procedure
. Attaching the rack angles and removing the
feet
1. Attach the two rack angles to the unit using the four
screws (B4 x 10) and polyamide washers.
Tightening torque: 120 x 10
c
Pay the attension to the sharp edge of rack angle.
2. Unscrew the four screws (PS3 x 14) to remove the
feet from the bottom of the unit.
B4 x 10
Polyamide
washers
Rack angle
Feet
PS3 x 14
Rack angle
c
Keep these screws and the feet.
When operating the unit after demounting it from the rack,
be sure to reattach the feet.
Tightening torque: 80 x 10
1-4
_2
N.m {12.2 kgf.cm}
Feet
PS3 x 14
B4 x 10
Polyamide
washers
_2
N.m {8 kgf.cm}
. Attaching the inner rails
3. Pull each inner rail from the two intermediate rails.
4. Pull each inner rail out of the intermediate rails while
pressing each stopper.
Intermediate rail
Inner rail
Stopper
Pull out
5. Attach the two inner rails to the unit with the eight
screws (B4 x 8).
Tightening torque: 120 x 10
B4 x 8
Press
Front bracket
_2
N.m {12.2 kgf.cm}
Inner rail
Inner rail
B4 x 8
RM-PP1