Software Prerequisites; Network Setup; Ntp Client Setup; Smsc Installation - Sony TMS Training Manual

Confidential
Protocol
4) Enable ICMP messages by going to windows firewall -> Advanced -> ICMP
messages and selecting all options, Apply, OK.
The firewall could be turned off all together as it is not connected to the outside
world. This will avoid any firewall issues regarding the TMS Client.
5) Windows Firewall configuration is now completed.

12.2.3 Software Prerequisites

Make sure that the following software is installed on the TMS Client PC:

Adobe Flash Player 11.1 (Minimum) (Win and Winax files)

Adobe Reader 8 (Minimum) (or other PDF reader to read manuals)

Internet Explorer 7+ or Firefox 3 (Minimum)

UltraVNC Server and viewer (32 bit) should be installed so that the
workstation be accessed from the TMS Server for remote support.

12.3 Network Setup

To change network credentials go to Control Panel -> Network connections -> right
click Properties, then Properties of IP4 and enter the IP address details manually:
IP Address
Subnet mask:
Default Gateway:

12.4 NTP Client Setup

To synchronise the time with NTP server double click on Clock -> Change date and
time settings -> Internet Time -> Change Settings and enter the IP address of the
TMS Server.

12.5 SMSC Installation

Install SMSC on the Client PC using the standard settings. Contact the Sony project
team to make sure it is the correct version for the LMT that is installed onsite.

12.5.1 Initial Login configuration

Username
Password
October 15
Integrator Training, UK
Digital Cinema Deployment
UDP
<IP Address of TMS Client PC>
255.255.255.0
< Default Gateway IP address from the IP Schema>
local
config
Protocol TCP
47 of 49