15V/1A Recharge (Input) Port Smarty Clamps CHARGE UP YOUR WEEGO 44 When you unpack your new Weego Jump Starter 44 for the first time, charge it up to 100% with either the wall Indicator or car charger provided. Remember to recharge your...
TURN OFF ALL ELECTRONICS! – air conditioner, radio, lights, etc. Remove any devices attached to your Weego 44. Never leave your Weego 44 connected to your engine’s battery unless actively jumping. Always disconnect the Smarty Clamps™ from your Weego 44 when not in use.
Page 4
Connect Clamps Power ON Attach Black (-), Then Red (+) When You Have GREEN LIGHT On Your Smart Box, Start Your Engine Once it Starts, Disconnect Clamps Detach Clamps From Battery from Weego 44...
Clear off any dirt or buildup with a wire brush or a dry towel before connecting your clamps. Place your Weego 44 in a secure location or suspend using the provided hook & lanyard so it won’t fall. Check your Smarty Clamps™ lights.
There may be an engine incompatibility issue. If the engine you’re connecting to is larger than what we recommend, it will try to pull more power than your Weego 44 is able to give. Please see Engine Compatibility to determine if your engine size falls within the scope of Weego 44.
I followed the necessary steps but my engine is still unable to start. Now what? •Does your Weego 44 have enough charge? You can use your Weego 44 at any level of charge but peak performance is best achieved with a fuller charge (greater than 80%, or 4 lights) - if operating at less than 80%, we suggest recharging your Weego 44, if possible.