Jump Starting Your Engine - Weego 44 Quick Start Manual

JUMP STARTING YOUR ENGINE

1.
Ensure your engine is completely OFF.
2.
Securely connect the Smarty Clamps™ to your Weego 44, then power ON.
3. Attach BLACK clamp to your battery's negative (-) terminal, then the
to your battery's positive
achieve MAXIMUM contact with the terminals. Poor connections will prevent you
from starting your engine! Clear off any dirt or buildup with a wire brush or a dry
towel before connecting your clamps.
4.
Place your Weego 44 in a secure location or suspend using the provided hook &
lanyard so it won't fall. Check your Smarty Clamps™ lights.
5.
When you have a
start, turn off your vehicle and check your Smarty Clamps™ lights.
6.
After a successful start, quickly disconnect the Smarty Clamps™ from your
Weego 44.
7. Detach the Smarty Clamps™ from the battery.
8.
You're now good to go - be sure to run your engine for at least 15 minutes before
shutting it off again so it has time to recharge your battery.
If you are having issues getting your engine started, see the Troubleshooting
section in your online owner's manual for further details and assistance.
Exposed Metal Jaws May Be HOT After Use!
(+) terminal. Adjust your Smarty Clamps™ to
GREEN READY light, start your engine. If the engine doesn't
WARNING!
RED
clamp