FAQ
JUMPSTARTERS
HOW DO WEEGO JUMPSTARTERS WORK?
Weego jump starters are designed for use with 12V vehicle batteries, they are not compatible with
6V, 24V, 48V or other voltage starting systems. Weego jump starters replace jumper cables, heavy
jump boxes, and roadside assistance by jump starting your dead battery in your car, boat, truck,
motorcycle, and so on. Weego's contain a lithium-ion battery like the one in your cell phone, which
is why they are so small and powerful.
ARE WEEGO JUMPSTARTERS SAFE?
Using a Weego is one of the safest ways to jump your vehicle. Our jump starters were made with
your safety and protection in mind, and our high-performance jump starters have a safety in place
for every possible issue and mistake we could possibly think of.
HOW DO I JUMPSTART WITH MY WEEGO JUMPSTARTER?
It's simple – in just four easy steps you'll be back on the go:
1. Plug the Smarty Clamps into the Jump Starter pack.
2. Connect the cables to your battery (blue indicators will light up) by
3. Look for the Green LED.
4. Get in your vehicle and start your engine.
5. Unplug the cable from your Jump Starter pack and remove the cable from
WHICH WEEGO IS BEST FOR MY VEHICLE?
Weego Jump Starters can be used on gas and diesel engines as follows:
Model # 44.1 & 44S Jump Starter: Up to 7L gas engines/3.5L diesel engines*
Model # 66.1 & 70 Jump Starter: All gas engines/5L diesel engines*
Model # 120 Jump Starter: All gas engines/up to 15L diesel*
* Engine size in Liters & is approximate; power requirement will vary for each vehicle.
NOTE: Extreme cold temperatures affect battery performance. If you operate in these conditions for
any length of time, consider the next-largest Weego.
clamping: Red (+) to Red (+) and Black (-) to Black (-).
BYPASS FEATURE:
If you see no light or a flashing Green LED, press BYPASS button until
Green LED goes solid.
your battery.
1
Need help?
Do you have a question about the N70 and is the answer not in the manual?
Questions and answers