Understanding Your Smarty Clamps - Weego 44 Quick Start Manual

UNDERSTANDING YOUR
Your
Smarty Clamps™
jump with both sight and sound. It will let you know when it is safe to jump
or if there is an error.
Smarty Clamps
have a "smart" box that will help guide you through a
READY
Smarty Clamps™
and you are ready to jump.
REVERSE +/-
You attached the
Make sure the BLACK clamp is attached to the battery's
NEGATIVE (-) terminal, and the
POSITIVE (+)
battery's
44 will not let you jump your engine.
COOL DOWN
WAIT FOR
The battery was cranked longer than the recommended 3
seconds, or the temperature protection was triggered. Detach
the Smarty Clamps™
down. Then, repeat steps 2-5 under Jump Starting Your Engine.
SEE BACK
Voltage incompatibility: your vehicle's battery is too weak
(< 2V) or too high (>13V)* to safely jump start.
SEE BACK
There may be an engine incompatibility issue. If the engine you're
connecting to is larger than what we recommend, it will try to pull
more power than your Weego 44 is able to give. Please see Engine
Compatibility to determine if your engine size falls within the scope
of Weego 44.
No light, no sound
You either have a very poor connection and the clamps cannot
detect they are connected to a battery, OR your vehicle battery is
so weak that it cannot be jumped, OR your Weego is not charged
to 20% or more (2 LED lights) and clamps cannot function..
™
Solid green light, no sound
detect that you have a good connection
Flashing green & red lights + beeping
on the wrong terminals.
Smarty Clamps™
RED
clamp is attached to the
terminal. If not attached properly, Weego
Flashing red light + beeping
and give the unit 3 minutes to cool
Solid red light, no sound
Solid red light + beeping