Related Manuals for Weego 70
Summary of Contents for Weego 70
- Page 1 JUMP STARTING POWER PACK JUMP STARTS All Gas Engines Diesel Engines up to 5 Liters + OWNER’S MANUAL Model No. 70...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Overview....................3 Getting Started ..................4 Specs / Charge Up Your Weego 70..........5 Jump Starting ..................6 Before You Jump ...............6 Jump Starting Your Engine............. 7-8 Understanding Your ........9 Smarty Clamps ® Troubleshooting ..............10 Engine Compatibility...............11 USB-A & USB-C Charging / Lighting........12 Important Safety Information ...............13... -
Page 3: Overview
(positive clamp to negative terminal, etc.) your clamps will let you know of the error (and won’t jump until you fix it!) Over-Heat: If your Weego 70 becomes too hot, power will be cut-off (up to 3 min.) until properly cooled. -
Page 4: Getting Started
GETTING STARTED Battery Indicator Lights Flashlight Button USB-A Output Port 5V/3A, 9V/2A, 12V/1.5A 15V/10A Accessory Port Socket Back of Unit ® Smarty Clamps 600 Lumen LED Lights Power ON/OFF Button Lanyard Post 5V/2A, 9V/2A USB-C Recharge Input Port Hook & Lanyard Smarty Clamps®... -
Page 5: Specs / Charge Up Your Weego 70
Weego 70 will last over a year without recharging, but to keep it topped off, recharge it every 6 months or so. Weego 70 will allow you to charge & discharge your unit up to 1000 times, which will give you a good 3-5 years of active use. -
Page 6: Jump Starting
NEUTRAL). TURN OFF ALL ELECTRONICS! – air conditioner, radio, lights, etc. Remove any devices attached to your Weego 70. Never leave your Weego 70 connected to your engine’s battery unless actively jumping. from your Weego 70 when not Always disconnect the ®... - Page 7 Connect Clamps Power ON Attach Black (-), Then Red (+) When You Have SOLID GREEN LIGHT Your Smart Box, Start Your Engine Once it Starts, Disconnect Clamps Detach Clamps From Battery from Weego 70...
-
Page 8: Jump Starting Your Engine
Poor connections will prevent you from starting your engine! Clear off any dirt or build-up with a wire brush or a dry towel before connecting your clamps. Place your Weego 70 in a secure location or suspend using the provided ®... -
Page 9: Understanding Your Smarty Clamps
NEGATIVE (-) terminal, and the clamp is POSITIVE (+) attached to the battery’s terminal. If not attached properly, Weego 70 will not let you jump your engine. Flashing Red Light COOL DOWN WAIT FOR The Weego battery overheats after long cranks or excessive current draw. -
Page 10: Troubleshooting
This can happen if the engine pulled the Weego battery past a certain limit during a jump start. It can also happen if the Weego is not stored with a full charge, or is not recharged every 3-6 months during storage. -
Page 11: Engine Compatibility
ENGINE COMPATIBILITY The larger the engine, the more power it’s going to need from your Weego to start; for this reason, we offer a range of sizes to accommodate most engines. Bear in mind, though, power demand from an engine isn’t an exact science and changes wildly from one car to the next –... -
Page 12: Usb-A & Usb-C Charging / Lighting
Normal click: Strobe • 3 • 4 click: SOS click: OFF Your Weego 70 will give you up to 15 hours of Flashlight Button flashlight time and up to 30 hours of strobe & SOS light on a full charge. -
Page 13: Important Safety Information
•Do not insert foreign objects into any ports on your Weego 70. •Your Weego 70 must be disposed of properly when it is no longer able to be used. You must recycle your unit at a local lithium-ion recycling facility. -
Page 14: Weego 70 Optimal Temperature Ranges
Weego 70: high temps your battery ages much faster. *DO NOT store your Weego 70 in any location in which the temperature can exceed 140˚F (ie. inside an enclosed vehicle on a hot day). To further elaborate . . .
Need help?
Do you have a question about the 70 and is the answer not in the manual?
Questions and answers