Troubleshooting - Weego 44 Quick Start Manual

TROUBLESHOOTING

Visit www.myweego.com/support/ for FAQs and additional
troubleshooting inquiries.
I can't get the Smarty Clamps™ green light to appear
•Do you have a good connection?
A poor connection between the clamps and the terminals can be the
difference between a successful and failed jump. Adjust the clamps to
make sure they' r e making maximum contact with your terminals, then
try again.
•Are your battery terminals dirty?
Build-up on your battery terminals can prevent you from getting a stronger
connection and can be the difference between a successful and failed
jump. See your vehicle owner' s manual for the best way to safely remove
buildup from your terminals.
•Are your battery terminals dirty?
Build-up on your battery terminals can prevent you from getting a stronger
connection and can be the difference between a successful and failed
jump. See your vehicle owner' s manual for the best way to safely remove
buildup from your terminals.
I followed the necessary steps but my engine is still unable to start. Now what?
•Does your Weego 44 have enough charge?
You can use your Weego 44 at any level of charge but peak performance is
best achieved with a fuller charge (greater than 80%, or 4 lights) - if operating
at less than 80%, we suggest recharging your Weego 44, if possible.
•Your engine may be too large/powerful for your Weego 44
Our batteries work hard to supply the power you need, but some engines
demand more than your Weego 44 can give. You may want to try the
next-larger Weego to better suit your needs. See Engine Compatibility in
the online Owner' s Manual (pages 12-13) to determine which Weego is
best for you.
•Your vehicle battery voltage may be too low or too high.
Weegos are designed to jump start batteries between 2V and 13V. If your
vehicle battery measures lower or higher than this range, the clamps will
not work for safety reasons.