Table of Contents
Advertisement
3.2
Assembly
Advantix shower channel mounting frame
Requirements:
The shower channel has been mounted according to the instructions
n
for use.
The complete surface of the shower channel has been lined.
n
The shower channel has been sealed, and the thin bed sealing is
n
fully cured.
The shower channel is equipped with a protective insert.
n
Apply the tile adhesive.
Mounting height 12 mm: Press the tile end rail down into the tile
adhesive as far as it will go.
12
Mounting height 15 mm: Set the tile end rail onto a tile adhesive bed
of a thickness of max. 3 mm.
15
Handling
8 from 9
Advertisement
Table of Contents
