Preparation For Operation - Oursson MO2610 Instruction Manual

The operation of this device in any case does
not imply application of any force to it, as this
may damage the product due to user fault.
SETTINg, Рiс. A-2
• Place the device on a flat horizontal heat resistant
surface, high from children's reach, keeping the dis-
tance from walls/furniture as shown in the picture
A-2. One side must be completely free. It is forbid-
den to embed this device.
• Do not place the working device under/near cur-
tains or other flammable materials, as this may
cause a fire.
PRODUCT SET, Рiс. В
Body. ........................................................................ 1 pc.
Enameled pan ..................................................... 1 pc.
1
Grid ..................................................................... 1 pc.
2
Handle for pan and grid ...................................... 1 pc.
3
Handle for spit. .................................................... 1 pc.
4
Spit ...................................................................... 1 pc.
5
Round pan 9"/22,8 cm ........................................ 1 pc.
6
Tray for crumbs ................................................... 1 pc.
7
Fish basket.......................................................... 1 pc.
8
Grill-basket. ......................................................... 1 pc.
9
Instructions manual ................................................. 1 pc.
Warranty card .......................................................... 1 pc.
ELEMENTS OF DESIgN, Рiс. С-1
1 Door handle
2 Spit bracing
3 Slots for grid and pans
4 Door
5
Control panel
6
Ventilation openings
7
Operation indicator
8
Removable tray for crumbs
9
Electric hobs (155 mm and 185 mm). Only for
MO3030
Inner backlight, Pic. C-1-2
Upper and lower heating elements, Pic. C-1-1
UTILIZATION
Control panel, Рiс. С-2
Function switch, Рiс. С-2-4
• STOP position, turns off the convection / spit
operation
• Convection (hot air circulation around the
product)
• Spit (spit rotates, uniformly browning on all sides)
• Convection and spit
Hobs switch, Рiс. С-2-5
(for MO3030 model)
• STOP position, turns off the hobs
• Turns on left hob(185mm/1000W)
• Turns on right hob(155mm/600W)
• Turns on both hobs
Temperature regulator, Рiс.С-2-1
• Adjusting the temperature from 100°C to
230°C
Р
Preparation mode switch, Рiс.С-2-2
• STOP position
• Upper heating element (upper heating)
• Lower heating element (lower heating)
• Upper and lower heating elements, simultaneous
operation of both upper and lower heating
elements
• Upper heating element and spit. (For MO2305,
MO2610 models)
• Upper, lower heating elements and convection
(For MO2620, MO3030 models)
• Upper, lower heating elements, convection and
spit (For MO2620, MO3030 models).
Timer, Рiс.С-2-3
• Timer, time selection from 0 up to 60 minutes.
• STOP position, utilized for stopping the cooking
process.
Spit construction, Рiс. С-5
1 Hook
Clamp
2
Fastener
3
4 Bayonet
5 Motor coupling

Preparation for operation

Before first use, wipe the body with a soft, dry cloth.
Wash the other parts with warm water and detergent.
Before assembling or disassembling the make sure that
the device is unplugged. Thoroughly dry all parts.
Turn on the empty device for 15 minutes, set the max-
imum temperature of 230 °C in
MO2620/МО3030), to remove the smell of a new device.
Ventilate the room. Allow the device to cool.
Order of operation, Рiс.C-2
1. Make sure that the crumb tray is completely installed,
and timer knob
the device.
2. Set the required temperature with the
3. Turn on the timer
, (mode
is set in the . position. Plug in
regulator.
for 5 minutes in the
for
, ( for
17