Adjust the angle stop to 90°:
Set the adjusting screw to stop the angle stop
at exactly 90°.
Mount the support of the blade cover to the
front of the planer table. To do this, screw the
support into the holes provided for this purpose
with 2 hexagon socket screws.
Attention: Be careful when tighten the screws!
Screw the two fixing bolts of the transporting
device into the holes provided for this purpose.
12.3.1
Mortising unit (optional)
The machine can be optionally equipped with a mortising unit.
Position the mortising unit (A)
machine
Fix the mortising unit with
washers
Adjust the table with the
before tightening the screws!
HOLZMANN MASCHINEN GmbH
www.holzmann-maschinen.at
ASSEMBLY
to the holes on the
included screws and
adjustment screw (B)
35
HOB 305PRO / HOB 305PROLL