Remaining Risk Factors - HOLZMANN MASCHINEN HOB 305PRO User Manual









A first aid kit in accordance with ISO 3864 should always be readily available for
a possible accident. Initiate the violation in accordance with the necessary first
aid measures. When requesting support, provide the following details:
1. Place of accident
3. Number of injured people
11.3

Remaining risk factors

It is important to ensure that each machine has remaining risks.
In the execution of all work (even the simplest) greatest attention is
required. A safe working depends on you!
Even if the machine is used as required it is still impossible to eliminate certain residual risk factors
totally. The following hazards may arise in connection with the machine´s construction and design:
 Risk of injury to the hands / fingers by the rotating planer shaft during operation.
 Risk of injury due to sharp edges of the workpiece.
 Risk of injury: hair and loose clothing, etc. can be captured and wound up! Safety
regulations must be observed with regard to clothing.
 Risk of injury due to contact with live electrical components.
 Risk of injury by tipping the machine.
 Risk of injury due to dust emissions, treated with harmful agents workpieces
 Risk of injury to the eye by flying debris, even with safety goggles.
 Risk of injury by kickback:
Kickback is a sudden reaction in case of improper handling of the workpiece. This
causes the ejection of the workpiece to the rear direction of the operator.
These risk factors can be minimized through obeying all security and operation instructions, proper
machine maintenance, proficient and appropriate operation by persons with technical knowledge and
experience.
This machine produces an electromagnetic field during operation. This field may
under some circumstances interfere with active or passive medical implants. To
reduce the risk of serious or fatal injury, we recommend persons with medical
implants to consult their physician and the medical implant manufacturer before
operating this machine!
HOLZMANN MASCHINEN GmbH
The plug of an electrical tool must strictly correspond to the socket. Do
not use any adapters together with earthed electric tools
Each time you work with an electrically operated machine, caution is
advised! There is a risk of electric shock, fire, cutting injury;
Protect the machine from dampness (causing a short circuit)
Use power tools and machines never in the vicinity of flammable liquids
and gases (danger of explosion)
Check the cable regularly for damage
Protect the cable from heat, oil and sharp edges
Avoid body contact with earthed components
www.holzmann-maschinen.at
N O T I C E
Emergency procedure
1. Place of accident
3. Number of injured people
W A R N I N G
W A R N I N G
SAFETY
30
HOB 305PRO / HOB 305PROLL