Installation Of The Device - Peiying PY-DVR020 Owner's Manual

• When in recording and camera mode, press to zoom out
• Press to turn on/off microphone
9. OK button
• Press to start/stop recording
• In camera mode, press to take a picture
• Press to confirm your choice/save settings
• When browsing through files, press to play/pause
a video
10. Underneath the rubber plug
• Mini USB port
• MicroSD card slot
• Reset socket

Installation of the device

1. Attach the DVR to the magnetic mount.
2. Clean the place on the windshield where you want to install
your device, then remove the protective film from the 3M
adhesive and secure the mount to the windshield.
3. Insert one end of the car charger into the mini USB port of
the device or the holder and then insert the other end into
EN
the car charger socket.
Note: Place the power
cord in a position which
would not interfere during
driving a vehicle.
22
Owner's manual