Specifications - Allen-Bradley MPL-A310 Installation Instructions Manual

24 MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size

Specifications

Attribute
Temperature, operating
Temperature, storage
Relative humidity, storage
Atmosphere, storage
(1)
IP Rating of motor with optional shaft seal
Motor without a shaft seal, and mounted in this direction:
Shaft down
Shaft horizontal
Shaft up
(3)
Motor with ATEX rating
(1) International protection code (IP66) is roughly equivalent to a NEMA 35 (dust tight, drip tight). IP rating descriptions are only for reference. Refer to
the international standards for more complete rating descriptions.
(2) An optional shaft seal kit is required to provide the IP66 rating (excludes lower rating for cable connectors).
See Additional Resources on page 25
(3) Operational environment according to ATEX directive 94/9/EC. See motor label for specific level of protection markings.
(4) To obtain the specified motor thermal rating, mount the motor on a surface with heat dissipation equivalent to a 304.8 x 304.8 x 12.7 mm
(12 x 12 x 0.5 in) aluminum heatsink.
Motor feedback, auxiliary feedback, and I/O connector kits are not provided. Refer to the
Kinetix Motion Accessories Specifications Technical Data, publication GMC-TD004, for
connector kit catalog numbers.
Rockwell Automation Publication MP-IN001I-EN-P - January 2015
(2)
installed
for shaft seal installation instructions.
Value
(4)
0...40 °C (32...104 °F)
-30...70 °C (-22...158 °F)
5...95% noncondensing
Noncorrosive
IP66 (dust tight, powerful water jets, room
temperature water)
IP53
IP51
IP50
Group II, Zone 2
(non-mining, normal operating conditions)