Remote Control And On-Screen Menu; Remote Control Functions - Datavideo PTC-150 Quick Start Manual

5. Remote Control and On-Screen Menu

5.1 Remote Control Functions

4 Position Setting
No Item
1 Reset
2 Group
3 Camera Select
Various combinations of settings (position, zoom, focus, gain
control and iris control) can be saved to presets.
Adjust Preset Point
Adjust position, zoom, focus, gain control and iris of the camera.
Set up Preset Point
Press any of the POSITION buttons 1~50 and then press SET button.
Recall saved setting
Press any of the POSITION buttons 1~50 and then press PRESET
button.
Set up Group Scan mode
Press any of the POSITION buttons 1~8 and then press GROUP
10
Description
Press RESET button to return the
camera lens to the front.
Use the No. bottom & the group
bottom to select the group scan.
Press any of the No. buttons 1~8
and then press GROUP button.
Select CAM1-CAM4 in a multi-
camera environment
Assign an ID number to the
camera intended for operation by
adjusting the IRID (SW2) switch
located at the rear of the camera
Press CAMERA SELECT (CAM 1~
CAM4) buttons corresponding to
the numbers set previously to
navigate between four cameras