Table of Contents
Advertisement
2 Connections and I/O
Settings
2.1
AB1A Front Panel
All AB1A connectors and indicators are located on the front panel. There are
three connectors Control Terminal, I/O Port, and Motor Out, and two indicators.
The detailed description of the AB1A connectors and indicators is given sections
2.1.1 and 2.1.2 below.
2.1.1 Front Panel Connectors
Connector
Control Terminal
Motor Out
I/O Port
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 3: AB1A Driver Box Front Panel
Description
5-pin connector that provides input from an external +48VDC
power supply (6.5A max). Provides direct control of the motor
ENABLE signal. See also Table 6
D-type 9 pin connector male -Interfaces to the motor. See also
Table 7.
D-type 25 pin connector female - Interfaces to the control source
(joystick or controller See also Table 8.
AB1A Driver Box User Manual
Connections and I/O Settings
12
Advertisement
Table of Contents
