Service Mode; Accessing Service Mode; Setting The Option Code - Bosch Benchmark Series Service Manual

58300000187895 ARA EN A
10.2

Service Mode

Service mode provides access to Option Code settings, error
memory, relay tests, front panel tests, program version information
and EEPROM version information for the oven operation.

10.2.1 Accessing Service Mode

1. Press and hold Enter, (1) and Bake for 5 seconds, or until
Service Mode appears in the display.
2. Press Enter to navigate through the menu. Additional
instructions will appear in the display.
3. Press Clear On/Off to exit Service Mode.
The table that follows reflects the Service mode menu options
available.
Copyright by BSH Home Appliances Corporation
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
MAY 2015
Table 9 Service mode menu options

10.2.2 Setting the Option Code

The induction range option code is 3088.
1. Follow the steps in the Accessing Service Mode section.
2. Advance through the menu until Option Code: #### is visible
3. Press (1) to edit; option code will blink when editable.
4. Use the numeric keypad to enter the new option code.
5. Press Enter when the correct option code is displayed.
6. Press Clear On/Off to exit Service Mode.
1901 Main St ▪ Suite 600 ▪ Irvine, CA 92614
Service Manual for Bosch Benchmark Series Induction Slide-in Ranges
(#### = current option code).
Page 34 of 36
800 944-2904