Pre-Operation Check; Check Engine Oil; Check Fuel; Operation Instructions - Zipper Mowers ZI-STE2800IV User Manual

14

OPERATION

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after initial
machine receipt and unpacking before putting the machine into operation. Please understand that later
claims cannot be accepted anymore.

14.1 Pre-operation check

14.1.1 Check engine oil

The generator is delivered without engine oil and fuel!
See capture maintenance => engine oil change

14.1.2 Check fuel

 Place the machine on a firm and flat surface.
 Open the fuel cap.
 Check the fuel filter.
Never refuel without fuel filter!
Fuel must be unleaded gasoline
NEVER REFUEL IF THE ENGINE IS RUNNING!

14.2 Operation instructions

 Always place the machine on a firm and flat surface! No turning, tilting or moving
during the engine is running
 Always check oil and fuel level before starting
 Do not connect the appliance before the unit is running at full speed. Disconnect
the appliance before turning the unit off.
 Connected devices must be in perfect condition.
Keep the cable length to the consumer as short as possible.

ZIPPER MASCHINEN GmbH
ZI-STE2800IV
A T T E N T I O N
Engine oil 15W40 must be filled before first use!
www.Zipper-Maschinen.at
N O T I C E
OPERATION
23