Label Position Of Safety Matters; Check Before Operation; Check The Oil Level - Zipper Mowers zi-ste2000iv Operation Manual

2.3 LABEL POSITION OF SAFETY MATTERS

These labels warn you of those latent dangers that will possibly cause serious accidents involving
casualties. Please read carefully the words on the labels, the safety warnings and the notes
recounted in the guide. If the labels have fallen off or are illegible, please contact the ZI-
STE2000IV agent and change them.
1 – Oil level label (Fig. E)
3 – Warning label (Fig. F)

2.4 CHECK BEFORE OPERATION

Check the generator, keep it on a horizontal surface without fail, and ensure that the en-
gine is turned off.

Check the oil level

Using oil without cleanser or 2-strokes engine's oil may shorten the gen
vice life.
Please use oil containing high quantity of cleanser or use high quality 4-strokes engine's oil. The
quality level must answer for or exceed the SG/SF level which is required by the American
manufacturer and lay down by American Petroleum Institute.
Please choose the engine oil with proper ropy degree based on the average temperature of the
area you live in. (Fig. G)
 mono-ropy degree
Dismantle the machine oil ruler, rub up it with
clean duster cloth, and stick it into the oil-
filling mouth to check the oil level. Pay attenti-
on not to drop the ruler into it.
If the machine oil level is below the bottom of
the machine oil ruler, fill the recommended
machine oil into the fuel-filling mouth.
If the engine runs when oil is in shortage, it can be seriously damaged.
1 – Oil fiiling lid (Fig. H)
2 – Switch of the engine (Fig. E)
2 – Oil filing mouth (Fig. H)
 multi-ropy degree
I M P O R T A N T
The oil alarming system will turn off the
engine before the oil level descends to
the security line. But to avoid the
inconvenience caused by unexpected
machine halt, we advise you to check
the oil level regularly.
3 – Upper oil level (Fig. H)
erator's ser-