13
OPERATION
13.1
Before first operation
13.1.1 Oil level of engine oil
Notice: Before first operation: Fill in motor oil.
① Uncover the oil mouth then clean
the engine oil ruler with clean cloth.
② Plug the engine oil ruler into the oil mouth
and don't turn it. If the oil level is below
the lower limit of the engine oil ruler you
should add some engine oil.
③ Add the engine oil the upper limit
of ruler.
④ Fix the engine oil plug ruler properly.
13.1.2 Fuel level
① Uncover the fuel tank.
② Check the fuel level, if the fuel level is
low you should refuel.
③ Add the fuel to the shoulder part of
the fuel filter. Never attempt to refuel without the
filter. Dirt or small parts might get into the
combustion chamber and damage the engine.
ZIPPER MASCHINEN GmbH
Stromerzeuger / Gasoline generator / Elektrocentrala ZI-STE6500
www.zipper-maschinen.at
OPERATION
Seite 32
Seite 32