Engine Oil Change; Air Filter - Zipper Mowers ZI-STE2800IV User Manual

Table of Contents

Advertisement

Available languages

Available languages

15.3 Engine oil change

Drain the used oil quickly and completely while the engine is still warm.
For the purposes of environmental protection fill the oil in tight containers and dispose
Pull out the drain screw (1)
Drain the dirty oil into a suitable container
Replace the drain screw
Remove the dipstick
Fill in new engine oil (15W40, 600ml) and check the
engine oil level with the dipstick
If the level is correct (FULL) reinsert the dipstick
Remove oil residues with a rag
Put the machine on an even area and start the
engine. If there is sufficient oil level the low oil
alarm light will be not activated

15.4 Air filter

Loosen the clip and remove the cover
Remove the air cleaner case
Remove the air cleaner
Clean the air filter with soapy water, then rinse
with clear water and let it dry thoroughly before
reassembling
Reassemble the air cleaner in reverse order
ZIPPER MASCHINEN GmbH
ZI-STE2800IV
Switch off the machine before starting the engine oil change!
the oil in a recycling center. Do not dispose it with household waste
www.Zipper-Maschinen.at
A T T E N T I O N
MAINTENANCE
26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents