Changing The Pin Code; Incorrect Pin Code Entered - Renault EASY CONNECT EASY LINK Introduction Manual

reMote engine start-uP (2/3)

changing the PIN code

To change your PIN code, please com-
plete the following steps:
– on vehicles equipped with a remote
control key, insert the key into the
starter ignition then turn the key posi-
tion to "ON";
– on vehicles equipped with a card
press the "Start/Stop" button for
2 seconds without pressing the
pedals.
note: it is not necessary to start the
engine in order to carry out this opera-
tion.
– select "Change PIN code" in the "MY
Renault" application;
– enter your new PIN code.
– on vehicles equipped with a remote
control key, turn the key position to
"LOCK"/0;
– on vehicles equipped with a card
press the "Start/Stop" button for
2 seconds without pressing the
pedals.
In the 60 seconds following the change
of PIN code (depending on your vehi-
cle), carry out the following operations:
– on vehicles equipped with a remote
control key, insert the key into the
starter ignition then turn the key posi-
tion to "ON";
– on vehicles equipped with a card
press the "Start/Stop" button for
2 seconds without pressing the
pedals.
note: for more information on operat-
ing the key or card, see Section 1 in
your vehicle user manual.
note: an email will be sent to you each
time the PIN code is modified.
note: it is not necessary to start the
engine in order to carry out this opera-
tion.

incorrect PIN code entered

After three incorrect code entries:
– any remote starting requests will be
refused until the vehicle is unlocked
using the card/remote control;
– the system will send a notification to
your smartphone warning you that
remote starting is deactivated.
note: to reactivate remote starting, you
must change your PIN code.
special feature on vehicles
equipped with the function.
It is imperative that the vehicle is
driven for at least 10 minutes be-
tween each use of the function. Risk
of engine oil wear.
6.27