Table of Contents
Advertisement
engine start-uP PrograMMing (1/3)
"Program
engine start"
menu
From the "Settings" menu, select the
"Vehicle" tab.
Use this function to program the remote
engine start-up function in order to heat
or ventilate the passenger compart-
ment up to 24h00 hours before using
the vehicle.
Programming engine start
Programming engine start
Ready at
1
Wake up every 2 hours
Programming the departure time
Activate the function then set your de-
sired departure time:
– press on the "up" and "down" arrows
to scroll through the hours and min-
utes until you get the desired time;
– adjust the air-conditioning controls to
the desired temperature in the pas-
senger compartment when starting
up the engine, then set to de-icing
mode (please see Section 2 of the
vehicle manual);
– turn off the ignition.
When locking your vehicle, two flashes
will appear then the hazard warning
lights and indicator lights switch on for
approximately three seconds to indi-
cate that the programming has been
taken into account.
note: the marker 1 reminds you of the
vehicle start time that you have already
set.
To activate remote start-up by pro-
gramming, you must select a time at
least fifteen minutes later than the
time displayed by the multimedia
system.
6.23
Hide quick links:
Advertisement
Table of Contents
