Blade Storage; Use; Blending; Food Guide - Black & Decker FX1000 User Manual

English
Blade Storage (Fig D)
• Place each of the 6 blades (24, 25, 26,
27, 28 or 29) into the slots in the blade
storage (37).
• Fit the cover (38) over the blades.
• The blade storage can be placed on top
of the processor lid (35) for storage.

Use

Blending (Fig A)
• Place the ingredients in the blender.
• Press the lid (19) onto the jar (18) &
insert the measuring cap (20) into the
hole in the lid.
• Attach the blender & processing bowl to
the main unit.
• Connect the appliance to a suitable
electrical supply.
• The blender can be operated by rotating
the speed control (5) to the required
speed or by pressing the "Turbo / Pulse"
button (4).
Note: Always operate the blender with the
lid in place.
Note: When blending warm liquids, loosen
the measuring cap (20).
Note: Never operate the blender with more
than 1000ml of liquid or when empty.
Mill (Fig B)
• Place the ingredients in the mill jar (21).
• Assemble the lid (22) to the jar then fit
the assembled mill and processor bowl
& lid to the main unit.
• Connect the appliance to a suitable
electrical supply.
• The mill should be operated by pressing
the "Turbo / Pulse" button (4).
• Do not operate the appliance
continuously for more than 1 minute.
• After operating continuously for 1
minute, let it cool down for at least 1-2
minutes before operating it again.

Food Guide

Ingredients Runtime Speed Qty
Pepper/Coffee beans 15-25 sec 10 40 gms
Pulses 25-35 sec 15 50 gms
Whisk, Kneading & Chopping Blade (Fig
C)
• Fit the processor bowl (11) onto the main
unit (3).
• Fit the whisk (13), kneading blade (14) or
chopping blade (15) over the spindle (6).
• Add the ingredients to the bowl & fit the
lid (12).
• Connect the appliance to a suitable
electrical supply.
• The appliance can be operated by
rotating the speed control (5) to the
required speed, or pressing the "Turbo /
Pulse" button (4).
• Use the food pusher (10) to add food into
the processor bowl (12) through the hole
in the lid (12).
• When the processing is complete,
remove the blade from the bowl before
removing the processed ingredients.
• After cleaning, always replace the
protective cover (14) on the metal
chopping blade (15).
-11-