Page 1
CORNER SHELF WITH ASSIST BAR 102828 41316▲ Models/Modelos/Modèles 41316▲ 41416▲ 41516▲ Series/Series/Seria 41416▲ Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. 41516▲ Specify Finish Especifíque el Acabado Précisez le Fini...
Page 2
BEFORE INSTALLING GRAB BAR IMPORTANT: The recommened mounting method for assist bars is to mount at least one end of the bar into a wood wall stud or wood blocking. 1. Remove the parts and products from the package. 2. Locate wood wall studs in a corner or wood supports. 3.
Page 3
WALL ANCHOR MOUNTING DIRECTIONS WALL ANCHOR MOUNTING DIRECTIONS DO NOT install supplied wall anchors into wallboard less than 1/2"~2 1/2" ½” or greater than 2 ½” thick. 13mm~64mm DO NOT install supplied wall anchors into wallboard that has been subjected to water damage or decay. DO NOT install supplied wall anchors into a wood stud.
Page 4
Hold on tightly to the flange and keep pressure on the bar Attach plastic shelf onto bracket and ensure the plastic pegs snap into the holes on behind the wall to ensure that the bar stays upright with the the support bracket. longest part of the bar pointing upward.
Page 5
WARNING GRAB BAR MAY NOT PROVIDE DESIGNED AMOUNT OF SUPPORT UNLESS THESE THE FOLLOWING STEPS REQUIRE DRILLING INTO THE WALL. When drilling into the INSTALLATION INSTRUCTIONS ARE STRICTLY FOLLOWED. For proper installation, at least one wall, exercise care to avoid any electrical wiring or plumbing that may be located behind the end of Grab Bar MUST be positioned over a wall stud.
Page 6
LIMITED WARRANTY ON PEERLESS ® ACCESSORIES Parts and Finish Proof of purchase (original sales receipt) from the original purchaser must be made available to ® Peerless Faucet Company for all warranty claims unless the purchaser has registered the product All parts and finishes of this Peerless accessories are warranted to the original consumer ®...