MODEL 6416/6417
1.3.6 Enter the resistance of the loop using the ▲ and ▼ keys and press the ► key
to start the next section of the calibration ("run CAL.R" will be displayed for
approximately 10 seconds).
1.3.7 "End CAL.R PASS" or "End CAL.R FAIL" will be displayed at the end of the
calibration. Press the ► key to save the new user calibration and return to the
"CAL.R" menu
1.3.8 Retry the calibration if failed.
v1 – 11/23/15
SERVICE/CALIBRATION MANUAL
- 12 -
CAT# 2141.01/2141.02