Ford Mustang Cobra Jet 50th Anniversary Owner's Manual page 3

1. INTRODUCTION
This is a Racing Vehicle. This vehicle is intended for off-
Register your Cobra Jet! Without registration, you may be
missing out on critical updates and helpful information!
• The Cobra Jet is a turn-key racing vehicle that requires proper race preparation.
• Beyond component specific maintenance we recommend you regularly perform a
"nut and bolt" inspection. This is a process of checking all the nuts, bolts, wiring,
belts, hoses, tires, etc. on your vehicle. See the included supplemental Vehicle
BOM and Torque Sheet for all torque specifications.
• Check your tire pressures as they will change over time and need to be checked
before every run.
• Prior to any runs, it is necessary to, at a minimum, neutralize the rear suspension.
See Chassis Setup section for the procedure.
• Change your spark plugs regularly. Fouled plugs can cause your Cobra Jet to run
poorly and lead to engine damage. See sections on Engine and Maintenance for
full details.
• Ensuring the vehicle is legal for race competition, including SFI certification, is the
responsibility of the racer. Familiarize yourself with the vehicle and the rulebook
for your sanctioning body.
• Be diligent with the care and maintenance of your vehicle!
It is the user's responsibility to understand and properly use all the safety
equipment on the vehicle. Check that the safety belts, seat, window net,
and roll bar padding are all in good condition and adjusted to fit the
driver. Keep in mind that modifications may be required to properly fit
Techline 1-800-367-3788
road use ONLY and is not street legal.
Before operating your Cobra Jet please read and
understand this owner's manual!
ATTENTION!
ATTENTION!
certain drivers.
Page 1
th
50 Anniversary
Ford Mustang Cobra Jet
Official Owners Manual