Table of Contents
Advertisement
2.4 Remote Controller Introduction
2.4.1 Use Remote Controller
Notice: Please note that Remote Controller is not a standard part of this DVR. Your package might not include it.
Steps of using the Remote Controller are described as below:
STEP1
Put the battery into the Remote Controller.
1.
Open the battery cover of the Remote Controller.
2.
Put into two AAA batteries whose model is 7 and make sure that they are not inserted upside down.
3.
Put back the battery cover.
STEP2
Check the followings if the Remote Controller does not work.
−
Whether the battery's anode and cathode are in the correct position or not.
−
Whether the power of the battery is ran out or not.
−
Whether there is barrier between the Remote Controller and DVR or not.
−
Whether there are some signals which transmitted by other devices disturbing the Remote Controller or
not.
Notice: If the possibilities above are excluded, please contact with vendor to change the Remote Controller.
Digital Video Recorder User Manual
1
Power plug
2
Alarm in/alarm out
3
RS485
4
USB interface
5
LAN port
6
Audio in 1-2
7
S-video output
8
Audio output
9
Video output
10
Video in 1-4
Fig2.2 Back Panel
5
Advertisement
Table of Contents
