Main Interface; Login - Swann P-6T4 User Manual

STEP8 The system access DVR automatically after finishing installation. The Network Client interface will be displayed
in IE browser, referred Figure4-1 Network Client Interface.
Notice: When the Network Client is running on VISTA operation system, you also need set relational ActiveX parameters. Steps of setting
parameters are shown as follows:
1. Open IE browser, then select 'Internet Options > Advanced > Security'.
2. Enable 'Allow software to run or install even if the signature is invalid' and 'Allow active content to run in files on my computer'.
3.Click "OK" to finish the settings.

4.2 Main Interface

The function button of the remote surveillance is shown as Fig4.2 Main Interface.

4.2.1 Login

The operation of the Network Client is the same as the DVR. Default username is 'Admin' and password '123456'.
44
Digital Video Recorder User Manual
Large Picture Quad Picture Next Video Channel
Fig4.2 Main Interface
Camera Audio Snap Picture DVR Record
Login
Software Setup
Remote Playback
Remote DVR Configuration
Remote PTZ