Displays And Pushbuttons; Functions - Becker Centronic SunWindControl SWC241 Assembly And Operating Instructions Manual

Assembly and Operating Instructions

Displays and pushbuttons

Transmission control light
A radio signal is indicated by the transmission control light being lit. If the battery
starts running out, the transmission control light flashes during transmission.
The transmitter power and/or radio range is reduced when the battery is run-
ning low. If the transmission control light is no longer lit when the pushbutton is
pressed, the batteries must be changed.
Group
Group control means controlling one or several receivers at the same time. The
programmed group is activated using a single command.
14
RETRACT button
STOP pushbutton
EXTEND button
Battery compartment
Setting aid
Wind threshold control switch
Programming pushbutton
Transmission control light

Functions