Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
IMPORTANT: READ ALL INSTRUCTIONS THOROUGHLY AND CAREFULLY PRIOR TO INSTALLATION OF LINEAR
SERIES FIXTURES AND RETAIN FOR FUTURE REFERENCE.
ATTACHING BRACKETS TO EXISTING HOUSING
1.
RAISE LED LIGHT COVER TO EXISTING FIXTURE. TAKE NOTICE IF DRIVER INTERFERES WITH FLUORESCENT BALLAST. ADJUST COVER 180 DEGREES OR REMOVE
EXISTING BALLAST IF APPLICABLE.
2.
INSTALL BRACKETS TO EXISTING HOUSING (AS SHOWN) WITH SUPPLIED SCREWS. INSTALL BRACKETS SO HINGE ALLOWS THE LED LIGHT COVER TO HANG IN
SUCH A WAY IT DOES NOT INTERFERE WITH THE MECHANICAL OR ELECTRICAL PORTION OF THE INSTALLATION.
1/2" TO 1"
3.
HANG LED LIGHT COVER FROM HINGE POINTS SO IT IS HANDS FREE.
4.
REFER TO "MAKING ELECTRICAL CONNECTIONS".
FLEXLIGHTINGSOLUTIONS.COM
42 1/4" BETWEEN MATING HOOKS
LIGHTING.TECH@FLEX.COM
LINEAR SERIES
1/2" TO 1"
913-851-3000
11-13-17
Advertisement
Table of Contents
