LG GBB930 Series Owner's Manual page 22

22 CARE AND MAINTENANCE
(5)
• Pull the wire holder (8) out of the central
part of the cover (6) and attach it to the
opposite side of the cover (6).
• Move the lead wires (10) to the opposite
side of the cover (6).
• Remove the upper door hinge (12) by
removing the screws (11).
• Remove the refrigerator compartment door;
• Unscrew the rod (13) and affix it to the
opposite side of the hinge (12) using a 6
mm wrench.
(11)
• Remove the center door hinge (15) by
removing the screws (14) with a 5 mm hex
wrench.
• Remove the freezer compartment door.
• Attach the plug (16) to the opposite side on
the refrigerator.
(16)
(6) (5)
(8)
(7)
(9)
(6)
(10)
(12)
(13)
(15)
(14)
• Remove the lower door hinge (18) by
removing the screws (17).
• Unscrew the rod (19) and affix it to the
opposite side of the hinge (18) using a 6
mm wrench.
• Remove the plug (20) in the upper part of
the freezer compartment door and install it
on the opposite side.
(18)
(19)
(17)
• Remove the doorstop (21), the bush (22)
and door closer (23) in the lower part of the
refrigerator compartment by removing the
screws (24) and reattach them on the
opposite side.
Do the same for the freezer door.
(23)
• After removal the refrigerator compartment
door, remove the plug (3) and slider (2) and
place each of them on the opposite side as
shown in the picture.
(1)
(3)
• Install the lower hinge (18) of the freezer
compartment, then the freezer
compartment door, then the center door
hinge (15) of the refrigerator compartment,
then the refrigerator compartment door,
then the upper door hinge (12), then
connect the connector cable (4), install the
cover (6) and (2) reverse the sequence.
(20)
(22)
(21)
(24)
(2)