Voice Announcement - Motorola ATS 2500p User Manual

English
an unknown hand. The radio stays in this state regardless
of power changes, for example, battery removal.
NOTICE:
If the radio has Inter-system roaming capability, the
system administrator is able to put the radio into a
non-functional state when missing radio roamed to
another system.
The radio can only be uninhibited by receiving an
uninhibit command from the system administrator or
reprogram the radio through labtool or depot CPS
only.

Voice Announcement

This feature enables the radio to audibly indicate the
current feature mode, zone or channel the user has just
assigned. This audio indicator can be customized per
customer requirements. This is typically useful when the
user is having difficulty reading the content shown on the
display.
Each voice announcement is within a limit of three seconds
maximum. The sum duration of all different voice
announcements in a radio shall be no more than 1000
seconds.
76
NOTICE:
This feature must be preprogrammed by a qualified
radio technician.
Check with your agent if Voice Announcement is
available for the feature you need.
The two options of priority for the Voice Announcement
available are:
High
Enables the voice of the feature to announce even
when the radio is receiving calls.
Low
Disables the voice of the feature from announcing when
the radio is receiving calls.
You hear a voice announcement when the features below
are preprogrammed in the radio.
• The radio powers up. The radio announces the current
zone and channel it is transmitting.
• Press the preprogrammed voice announcement button
(which specifically programmed to playback the current
zone and channel). The radio announces the current
zone and channel it is transmitting.