English
Change of Channels during Emergency
For ALL Emergency transmissions, when changing
channels:
•
If the new channel is also preprogrammed for
Emergency, you can change channels while in
Emergency operation. The emergency alarm or call
continues on the new channel.
•
If the new channel is not preprogrammed for
Emergency, the display shows No emergency, and you
hear an invalid tone until you exit the Emergency state
or change to a channel preprogrammed for Emergency.
Emergency Keep-Alive Feature
NOTICE:
The radio only exits the Emergency state using one
of the ways mentioned in the previous sections.
See
Sending an Emergency Alarm on page
Sending an Emergency Alarm with Emergency Call
on page
72, or
Sending a Silent Emergency Alarm
on page
73.
Security
This chapter explains the radio security features.
74
Radio Lock
This feature changes your radio to a more robust security
system.
If this feature is enabled in your radio by a qualified radio
technician, when you turn the radio on, the display shows
Radio locked.
Unlocking Your Radio
1 Enter your numeric password.
Clear radios – 0 to 8 characters.
2 Perform one of the following actions:
•
Press the Menu Select button directly below Sel
to enter the code.
•
Press the Menu Select button directly below Del
71,
to delete any unwanted characters.
•
Press the Back button to exit the feature.
If the password is correct, the radio unlocks.
If the password is incorrect, the display show
Incorrect password and the radio remains locked.