Sync; Resetting The Watch - Timex Ironman Classic 50 Move+ Instruction Manual

SYNC

Smartphone Sync allows your TIMEX IRONMAN Classic 50 Move+ to connect to a compatible
Smartphone via Bluetooth Low Energy technology. Access the Sync menu to initiate the Bluetooth Low
Energy connection between your watch and your TIMEX Connected app.
1. From the Time of Day screen, push the Mode button until you see Sync on the screen.
2. Push the Start/Split button to initiate the data transfer process.
a. When the transfer has been completed successfully you will see Sync Ok on the screen.
b. If the transfer fails you will see Sync Fail on the screen.
3. You can push the Stop/Reset button to cancel the sync process at any time.
NOTE: All appointments and alarms will be suspended during the sync process. If you have an active
workout running when the sync is initiated, the workout will be stopped and reset (not saved).

RESETTING THE WATCH

Performing the watch reset sequence resets the watch and clears all user entered data. Please make
sure to transfer any data you wish to save before resetting your Classic 50 Move+.
1. Press and hold the Set/Recall, Mode, Start/Split and Stop/Reset buttons for 4 seconds.
a. The watch will reset fully and will return to the "Out of Box" state.
® ®
TIMEX IRONMAN Classic 50 Move+ Owner's Manual Page 15