Expanding the RI45 PII
4.6
Options
Additional Disk
An optional second IDE disk drive can be built into the free rear disk drive
Drive
slot available. Provisions for the necessary wiring have already been made.
Authorized Types
Only ATA33-compatible drives can be used as a second disk drive. The
of Disk Drive
drives must display the CE or UR symbol. You can obtain further information
from your service representative.
Setting the Plug-in
On the rear of the disk drive there are plug-in jumpers to set the operating
Jumpers
mode. If there are jumper settings printed on your drive, these settings apply.
Additional
You can add to the functionality of your RI45 PII by expanding the
Hardware
configuration of the hardware to fit your individual requirements. The
Expansions
following table shows the options offered by Siemens.
Please contact your Siemens sales representative for further options.
64 Mbytes memory expansion
128 Mbytes memory expansion
Caution
!
Risk of damage to the unit!
Please note that only qualified personnel should be allowed to work on the open
unit, so the warranty on the device is not affected. Authorized Siemens
maintenance and repair centers offer you a specialist maintenance service.
4-10
Option
6ES7791-0FR00-0XA0
6ES7791-0FS00-0XA0
Order Number
Product Information Bulletin RI45 PII
C79000-Z7076-C814-02