Table of Contents
Advertisement
Unpacking and Installing the RI45 PII
Power supply connector Input
Power supply connector Output
PS/2 keyboard
PS/2 mouse
LPT 1 printer
Parallel interface
MPI/DP multipoint interface (RS485)*
COM 1
V.24/MODEM/PLC
Serial port
COM 2
V 24 /mouse
V.24 /mouse
Serial port
VGA Interface
Loudspeaker (RI45 PII Tower only)
Microphone (RI45 PII Tower only)
Relay output (with SafeCard only)
* Galvanic isolation within the safety extra-low voltage circuit (SELV)
Ventilating Slots
The raised air outlet slots for ventilation are located at the front and back
side. These slots must not be covered in any way.
Caution
!
Risk of overheating!
If you cover up the slots for the inlet and outlet air in any way, there is a risk
that your RI45 PII will be damaged.
2-6
Ports and Connectors
Function
Connection for power supply
(120/240V AC)
Connection for external monitor
(120/240V AC)
Connection for keyboard (trackball
supported)
Connection for PS/2 mouse
Connection for printer with parallel
interface
Connection for S7 programmable
(compatible with CP 5611)
Connection for S5 programmable
controller
Connection for serial mouse
Connection for serial printer
Connection for external monitor
Connection for external stereo
loudspeaker
Connection for microphone (mono)
Connection of a signaling unit to the
"SafeCard" monitoring module.
Technical data:
Switching voltage DC: max. 60V
Switching current DC : max. 1A
Switching power DC
: max. 30W
Limiting continuous
current DC
: max. 1A
Product Information Bulletin RI45 PII
C79000-Z7076-C814-02
Advertisement
Table of Contents
