Table of Contents
Advertisement
Chapter 4: BIOS (for EPYC 7001 Series)
Default Options
Restore Defaults
To set this feature, select Restore Defaults from the Save & Exit menu and press <Enter>.
These are factory settings designed for maximum system stability, but not for maximum
performance.
Save as User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press <Enter>. This
enables the user to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <Enter>. Use
this feature to retrieve user-defined settings that were saved previously.
Boot Override Section
Listed on this section are other boot options for the system (i.e., Built-in EFI shell). Select an
option and press <Enter>. Your system will boot to the selected boot option.
89
- Quick Links:
- Motherboard Features
- Connectors
- Jumper Settings
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the H11SSL-I/C/NC and is the answer not in the manual?
Questions and answers
Где можно отремонтировать H11SSL-i
You can contact Supermicro for repair services at the following locations:
United States:
- Super Micro Computer, Inc.
980 Rock Ave., San Jose, CA 95131, U.S.A.
Tel: +1 (408) 503-8000
Email: support@supermicro.com
Europe:
- Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML 's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Email: support@supermicro.nl (Technical Support)
Email: rma@supermicro.nl (Customer Support)
Asia-Pacific:
- Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C)
Tel: +886-(2) 8226-3990
Email: support@supermicro.com.tw
For repair services, contact the technical support or customer support email relevant to your region.
This answer is automatically generated