Table of Contents
Advertisement
Chapter 5: UEFI BIOS (for EPYC 7002 Series)
5.7 Boot
Use this tab to configure Boot Settings:
Boot Mode Select
Use this item to select the type of device that the system is going to boot from. The options
are LEGACY, UEFI, and DUAL. The default setting is DUAL.
Legacy to EFI Support
This option Enables or Disables the system to boot to an EFI OS after the boot failed from
the legacy boot order.
FIXED BOOT ORDER Priorities
This option prioritizes the order of bootable devices that the system to boot from. Press
<Enter> on each entry from top to bottom to select devices.
Delete Boot Option
Use this feature to remove a pre-defined boot device from which the system will boot during
startup. The settings are [any pre-defined boot device].
119
- Quick Links:
- Motherboard Features
- Connectors
- Jumper Settings
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the H11SSL-I/C/NC and is the answer not in the manual?
Questions and answers
Где можно отремонтировать H11SSL-i
You can contact Supermicro for repair services at the following locations:
United States:
- Super Micro Computer, Inc.
980 Rock Ave., San Jose, CA 95131, U.S.A.
Tel: +1 (408) 503-8000
Email: support@supermicro.com
Europe:
- Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML 's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Email: support@supermicro.nl (Technical Support)
Email: rma@supermicro.nl (Customer Support)
Asia-Pacific:
- Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C)
Tel: +886-(2) 8226-3990
Email: support@supermicro.com.tw
For repair services, contact the technical support or customer support email relevant to your region.
This answer is automatically generated