I-View AnyCam DM-12MIPS Operation Manual page 54

 D/N mode:
Passive: Select this to enable the Network Camera to automatically switch to B/W image
and removes the IR Cut filter by judging the level of ambient light with IR sensor.
Active: Select this to enable the Network Camera to automatically switch to B/W image and
removes the IR Cut filter by judging the level of ambient light with image sensor..
Day mode: In day mode, the Network Camera switches on the IR cut filter at all times to
block infrared light from reaching the sensor so that the colors will not be distorted
Night mode: In night mode, the Network Camera switches off the IR cut filter at all times.
Schedule mode: The Network Camera switches between day mode and night mode based
on a specified schedule. Enter the start and end time for day mode. Note that the time
format is [hh:mm] and is expressed in 24-hour clock time.
54