I-View AnyCam DM-12MIPS Operation Manual page 53

 VBR (Variable Bit Rate): VBR files vary the amount of output data per time segment. It
allows a higher bitrates (and therefore more storage space) to be allocated to the more complex
segments of media files while less space is allocated to less complex segments.
 CBR (Constant Bit Rate): The rate at which a codec's output data is constant. CBR would not
be the optimal choice for storage as it would not allocate enough data for complex sections
(resulting in degraded quality) while wasting data on simple sections.
 Bit Rate mode: Set the max. Bitrate to 200~12000 Kbps. The higher value corresponds to the
higher video quality, but the higher bandwidth (file size) is required.
 Quality: hen bitrate type is selected as Variable, 9 levels of video quality are selectable. The
higher will get better video quality, but the higher file size.
 Save: Click Save icon to save the setting parameters.
 Image setup: Click this button to setup the image parameters. Setup set the image quality of the
IP Camera, including brightness, contrast, saturation, sharpness, etc. The detail deception as
below:
 Profile mode:
Auto: The video will auto switch to "Day Mode" or " Night Mode" base on the "D/N
Mode" setting.
Day profile: Enable this mode, the video will show the " Day profile" setting always.
Night profile: Enable this mode, the video will show the " Nigh profile" setting always.
53
.