Classification According To Din En 60601-1; Information About Electromagnetic Compatibility - Pari BOY mobile S Manual

6.2 Classification according to DIN EN 60601-1
Type of electric shock protection
Degree of protection from electric shock of the
part used (nebuliser)
Degree of protection against water ingress in
accordance with IEC 529 (IP rating)
Degree of protection when used in the
presence of flammable mixtures of anaesthetics
with air, with oxygen, or with nitrous oxide
Operating mode (30 min. on, 30 min. off)
6.3 Information about electromagnetic
compatibility
Electrical medical equipment is subject to special precautionary
measures with regard to electromagnetic compatibility (EMC).
Such equipment must only be installed and operated in accord-
ance with EMC instructions.
Portable and mobile high-frequency communication devices
can disrupt electrical medical equipment. Using accessories,
converters and power cords other than those specified, with
the exception of converters and power cords that the manufac-
turer of the medical electrical device sells as spare parts for in-
ternal components, can result in higher emission levels or
lower the resistance to interference of the device.
The device must not be placed directly beside or on top of
other devices for operation. If the medical electrical device
must be placed beside or on top of other devices to operate it,
it should be monitored constantly to ensure that it is operating
properly in the arrangement used.
– 48 –
Protection
class II
Type BF
No protection
No protection
Intermittent
operation