Pari LC SPRINT User Manual

User Guide:
Nebulising with the PARI LC SPRINT
1
Wash your hands
thoroughly before each
session.
4
Open the nebuliser cap.
Pour in the inhalation
solution. Close the nebu-
liser cap.
6
Breathe in slowly and deeply. If your nebuliser is
fitted with PIF Control, you will feel a resistance when
breathing in too quickly. If you notice this, pause for a
moment, then try to inhale more slowly.
When a different noise comes from the nebuliser cham-
ber (it will change from a smooth hissing to a crackling
noise), this indicates that nebulisation has finished.
2a
Attach the mouthpiece or
the mask to the nebuliser.
5a
Sit upright in a relaxed position and switch on the
device. Take the mouthpiece between your teeth and
close your lips around it.
OR
®
2b
If using a baby mask it
must only be used in
conjunction with the
baby bend. Adjust the
alignment of the bend and
position the mask accord-
ing to the position of the
baby or infant.
7
Switch off device.
Disconnect the nebuliser
chamber from the tubing.
Switch the device back on
to dry the tubing.
3
Connect the nebuliser
and compressor with
the connection tubing.
Connect the compressor
to the mains power
supply.
5b
For infants, ensure that
the nebuliser is upright.
Gently press the mask
against the face so that
it fits snugly.
8
Disconnect the power plug.